1050 Aluminium alloy Rod is one of the most popular grades of Aluminium used today. 1050A Aluminium Round Bar has excellent corrosion resistance, high ductility, moderate strength and a highly reflective finish. Aluminium 1050 Bar is most suitable of use as food industrial containers, architectural flashings, cable sheathings, lamp reflectors and chemical process plant equipment.
Prodsuct Specifications
Item:1050 Aluminium Round Bar
Standards:1050 Aluminium Round Bar ASTM B221, EN573, and EN485 international standards.
Temper:O, H12, H14, H16, H18, H22, H24, H26, H32, H112
Round Bar Diameter:0.1-600mm,etc
Hexagonal Bar Diameter:0.1-600mm,etc
Flat Bar Thickness:0.1-600mm, etc
Width:1-2500mm,etc
Square Bar Size:1mm*1mm-800mm*800mm, etc
Surface: Anodized, Polished, Mill finished, Bright finish
Packaging: Outer packing Export standard, wooden pallet
Prodsuct Parameter
| Chemical Composition | |||||
| Alloy | Si | Fe | Cu | Mn | Mg |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 |
| Zn | -- | Ti | Each | Total | Al. |
| 0.05 | 0.05V | 0.03 | 0.03 | - | 99.5 |
Mechanical properties
Tensile strength σb (MPa): 110~145. Elongation δ10 (%): 3~15.
Heat treatment specifications:
1) Complete annealing: heating 390~430℃; depending on the effective thickness of the material, the holding time is 30~120min; cooling with the furnace to 300℃ at a rate of 30~50℃/h, and then air cooling.
2) Rapid annealing: heating 350~370℃; depending on the effective thickness of the material, the holding time is 30~120min; air or water cooling.
3) Quenching and aging: quenching 500~510℃, air cooling; artificial aging 95~105℃, 3h, air cooling; natural aging room temperature 120h
Prodsuct Features and Applications
1050 aluminum alloy is formed by adding a small amount of copper to pure aluminum. It has excellent forming characteristics, high corrosion resistance, good weldability, and electrical conductivity.
Often used in daily necessities, lighting appliances, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, namesheets, electrical appliances, stamping parts, and other prodsucts. In some occasions that require high corrosion resistance and formability, but not high requirements for strength, chemical equipment is its typical use.
Widely used in prodsucts that do not require high strength, such as chemical instruments, thin-sheet processed parts, deep-drawn or spinning concave vessels, welded parts, heat exchangers, clock surfaces and disc surfaces, namesheets, kitchenware, decorations, reflective appliances, etc.