5000 series aluminum rods 8mm
| Prodsuct Description of aluminum rods |
1.Item: aluminum rods
2.Material Grade:5083,5052,etc
3.Finish condition:O,H112,T6,etc
4.Diameter:ø8mm
5.Length:1-6m or as customer's request
6.Surface Treatment:mill-finished,polished,anodized,brushing,sand blasting,powder coating,etc
7.Moq:500kg
8.Accuracy class:A
9.Chemical Composition:Si0.25%,Fe0.40%,Cu0.10%,Mn0.10%,Mg2.2-2.8%,Cr0.15-0.35%,Zn0.10%,other0.15%,Al balance
10.Mechanical Propety:tensile strength>170Mpa,yield strength>70Mpa,elongation>17%
11.Package:standard package/wooden case/pallet/or as custmer's request.
| Prodsuct Pictures of 5000 series aluminum rods |
| Properties |
1）Plasticity and high corrosion resistance,
2）heat treatment can not be strengthened, the plasticity is still good in the semi-cold hardening
3）low plasticity when cold work hardening, good corrosion resistance,
4）good weldability, poor machinability, can be polished.
Application:
5052 Aluminum Rod Uses Mainly used for demanding high plasticity and good weldability, low-load parts that work in liquid or gaseous medium, such as mailboxes, gasoline or lube conduit, a variety of liquid containers and other small deep-drawn Load parts: Wire is used to make rivets are also commonly used in transportation vehicles, ship's sheet metal parts, instruments, street lamp bracket and rivets, metal prodsucts, electrical housings, etc.
If you are interested in our prodsucts, please offer these information when sending inquiry: |
diameter
length
weight
package detailed request
total quantity
application
any special requirements...
| Contact us |
Email:gugeSigni@ksxinan.com
Tel:0086051255105768
Official web:www.Signi-aluminum.com
Alibaba web:www.ksxinan.en.alibaba.com