Prodsuct Introdsuction
5052 aluminium sheet exhibits higher corrosion resistance than other aluminium alloys, and higher strength than 3003 aluminium sheet. It maintains a superior resistance to salt water, making it a popular material for marine applications.5052 aluminium sheet is easy to form, stamp, weld and finish. With the proper setup, it has fair machinability. It also has the low density and excellent thermal conductivity, used for aircraft fuel tanks, storm shutters, refrigerator liners and panels, etc
Prodsuct specification
OD：3MM to 500MM
Width: 12mm to 500mm, Custom Width Can be Cut from Plates
Length: Custom Lengths Available
Cut to Size Flat Bars, Round Bars, Blocks Available On Request
Finish: Mill Finish, Polished, Close Tolerance Polished Rods and Bars, Anodized
Chemical Composition
Chemical composition:
Aluminum Al : balance; silicon Si: 0.25;
Copper Cu: 0.10; magnesium Mg: 2.2 to 2.8;
Zinc Zn: 0.10; manganese Mn: 0.10;
Chromium Cr: 0.15 to 0.35; iron Fe: 0.4 0 .
Mechanical Properties
| Grade | Temper | Diameter/mm | Tensile Strength Rm/MPa | Yield Strength Rp0.2/MPa | Elongation/% |
| 5052 | H112 | ≤250 | ≥170 | ≥70 | -- |
| O | ≥170~230 | ≥70 | ≥17 |