5052 aluminum alloy 12inch diameter aluminum tube
1.prodsuct introdsuction
The 5052 aluminum alloy belongs to the Al-Mg alloy and has a wide range of applications. Especially in the construction industry, it is inseparable from the alloy and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability and medium strength. The main alloying element of 5052 aluminum alloy is magnesium, which has good forming and processing properties, corrosion resistance, weldability and medium strength. It is used in the manufacture of aircraft fuel tanks, oil tubes, and sheet metal parts for transportation vehicles and ships, instruments and street lamp brackets. Rivets, hardware, electric-shells, etc.
5052 aluminium alloy is the most widely used rust-proof aluminium alloy, which has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in Semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing. Uses are mainly used for low-load parts which require high plasticity and good weldability and work in liquid or gas media, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small-load parts made by deep drawing: wires rodss are used as rivets.
aluminum forging tube | aluminum extruded tube |
2.chemical composition
Al: Allowance
Si: <0.25
copper: <0.10
Mg:2.2~2.8
zinc: <0.10
Manganese: <0.10
Chromium chromium: 0.15-0.35
Iron and iron: <0.40
Note: Individual: <0.05; Total: <0.15
3.mechanical property
Tensile Strength_b(MPa)173-244
CONDITIONAL YIELD STRENGTH_0.2(MPa)>70
Density 2.68 g/cubic centimeter
Sample size: all wall thickness
Note: Longitudinal Mechanical Properties of Pipes at Room Temperature
aluminum 5052 tube | aluminum 7075 t6 tube |
4.contact us
email:gugeSigni@ksxinan.com
website:www.Signi-aluminum.com
welcome to send us inquiry!