1. Home
  3. 2A50 Aluminum Forgings Forged Prodsuct Parts

2A50 Aluminum Forgings Forged Prodsuct Parts

Last Updated: 2023-08-18

1. Prodsuct Introdsuction

2A50 Aluminum forgings forged prodsuct parts

2A50 is a high strength forged Al-Cu-Mg-Si alloy, which can be strengthened by heat treatment. In a hot state, it has high plasticity and is easy to forge and stamp. After solution treatment and artificial aging, it has high strength and good process plasticity, but it has an extrusion effect, and its longitudinal and transverse properties are different. The corrosion resistance of the alloy is good, but there is a tendency of intergranular corrosion. The resistance spot welding and seam welding have good weldability, while the arc welding and gas welding have poor performance. Its cutting performance is good.

2.Technical parameters

2A50 Chemical Composition
0.30.7Fe Ni0.150.050.10Remainder

Tensile Properties 2A50 Aluminum forgings
TemperStabilization treatmentTension strength Rm/MPaElongation A (%)
Temperature/℃Holding time /h

3.Prodsuct Features

Because of its good casting properties, 2A50 aluminum alloy is suitable for prodsucing large cross-section ingots. It is used as the blank of large hot-forged parts, such as partition frame, bracket, and rocker arm of aircraft. It is also used to manufacture medium and small forgings and die forgings with complex shape and medium strength.

The time interval between solution quenching and aging strengthening of 2A50 aluminum alloy should be less than 6 h, the overburning temperature should be 545 ℃, and the forging temperature should be 470-370 ℃.

4.Company Information

Signi Aluminum(Kunshan) devoted ourselves to Aluminum alloy prodsucts for many years, covering most of Europe and the Americas market. We are expecting to become your long team partner in China.

Please feel free to send us your detailed requirements, you would be satisfied with our service.

Request a Quote