5083-H112 Aluminum Tube introdsuction
5083-h112-aluminum-tube,5083 is commonly used in ships, ships, vehicle materials, welding parts of automobiles and aircraft sheets, pressure vessels requiring strict fire protection, refrigeration devices, television towers, drilling equipment, transportation equipment, missile components, armor and so on.It has good forming performance, corrosion resistance, weldability, medium strength.
prodsuct parameters
| Typical alloy | 5083 aluminum tube |
| Material state | O, T3, T4, T4, T3, T351, T451, H112 |
| Extruding tube | Outside diameter 20mm~300mm |
| Seamless tube | Outside diameter 20mm~600mm |
| Large diameter aluminum tube | Custom-made |
| Typical prodsuct | Aircraft fuel and fuel conduits, fuel tanks, as well as various marine and land cloud equipment components, cold stamping parts, sheet metal prodsucts, street lamp pillars; materials used as rivets or welding rodss. |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Other | AL | ||
| New brand | Old brand | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | —— | Each | sum | |
| 5083 | LF4 | 0.05 | 0.15 | allowance | |||||||||
Prodsuct advantage
5083 belongs to Al-Mg-Si alloys. It is widely used, especially in the construction industry. It is the most promising alloy. Good corrosion resistance, good weldability, good cold workability and moderate strength. The main alloying element of 5083 is magnesium, which has good formability, corrosion resistance, weldability and medium strength. It is used to make sheet metal parts of aircraft fuel tank, oil tube, traffic vehicle and ship, instruments, street lamp brackets and rivets, hardware prodsucts, electrical shell, etc.
Al-Mg alloy is one of the most widely used anti-rust aluminium alloys, which has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in Semi-cold hardening, low plasticity in cold hardening, good corrosion resistance, good weldability, poor machinability and polishing. It is mainly used for low-load parts which require high plasticity and good weldability and work in liquid or gas media, such as mailbox, gasoline or lubricant conduit, various liquid containers and other low-load parts made by deep drawing: wires rodss are used as rivets.
Prodsuct display