7075 T6 aluminum extrusion hollow tube profile
1.introdsuction of 7075 T6 aluminum alloy
American ALCOA 7075-T6 precision machining / aluminum alloy sheet for mold.
7*** series is aluminum, zinc, magnesium alloy, one of the most powerful alloys in business, common
Corrosion resistance and mechanical properties. 7075-T6 has good plasticity after solution treatment, and has good heat treatment strengthening effect. It has high strength below 150 degrees, and has particularly good low temperature strength, poor weldability, stress corrosion cracking tendency, and double aging can improve anti-scc performance.
American ALCOA 7075-T6 precision machining / aluminum alloy sheet for mold.
7*** series is aluminum, zinc, magnesium alloy, one of the most powerful alloys in business, common
Corrosion resistance and mechanical properties. 7075-T6 has good plasticity after solution treatment, and has good heat treatment strengthening effect. It has high strength below 150 degrees, and has particularly good low temperature strength, poor weldability, stress corrosion cracking tendency, and double aging can improve anti-scc performance.
The main alloying element of 7075 is zinc, which is very strong [1] high, with good mechanical properties and anodic reaction. It is mainly used to manufacture aircraft structures and other high-stress structural parts that require high strength and high corrosion resistance, such as upper and lower wing panels and purlins. Good solution after solution treatment, good heat treatment strengthening effect, good strength below 150 degrees, and particularly good low temperature strength, poor welding performance, stress corrosion cracking tendency. Also widely used in mold processing, mechanical equipment, fixtures and so on.
Chemical composition: silicon si; <0.4 iron Fe; <0.5 copper CU; 1.2-2.0 manganese Mn; 2.1-2.9 magnesium Mg; <0.3 chromium Cr; 0.18-0.28 zinc Zn; 5.1-6.1 titanium Ti.
7075 aluminum tube | large diameter 5A06 aluminum tube | aluminum extruded tube |
2.physical characteristics of 7075 aluminum alloy
Tensile strength: 524 Mpa
0.2% yield strength: 455 Mpa
Elastic modulus E:71GPa
Hardness: 150HB
Density: 2.81g/cm^3
7075 aluminum alloy | 30mm diameter aluminum alloy tube | aluminum extrusion profile |
3.Main uses
Aerospace and aerospace industry, blow moulding (bottle) mould, ultrasonic welding mould, golf ball head, shoe mould, paper moulding, foaming moulding, wax removal mould, model, fixture, mechanical equipment, mould processing, used to prodsuce high-end aluminum alloy bicycle frame.
4.package details
packed in wooden cases
aluminum tube wooden case package | aluminum bars wooden pallet package |
Contact us:
Email:gugeSigni@ksxinan.com
Tel:0086-051255105768
Mobile:0086-15370756920
Welcome to send us inquiry!