ALMINUM 7075
7075-T6 aluminum is a high strength alloy with good resistance to stress corrosion cracking. Since its introdsuction, it has been the mainstay of the aviation industry. Aluminum 7075 brings moderate toughness and excellent strength to weight ratio. It is also worth noting that the strength of the 7075 aluminum alloy increases at sub-zero temperatures.
Specifications
| Aluminum Tubing |
| OD Wall Grades |
0.125 0.20 2024 ,3003, 5052, 6061, 7075, 5086 |
| 0.125 0.28 2024 ,3003, 5052, 6061, 7075, 5086 |
| 0.125 0.35 2024 ,3003, 5052, 6061, 7075, 5086 |
| 0.187 0.20 2024 ,3003, 5052, 6061, 7075, 5086 |
| 0.187 0.28 2024 ,3003, 5052, 6061, 7075, 5086 |
Chemical Composition of Aluminum Tubes and Pipes
Al balance
Zn 5.1-6.1%
Mg 2.1-2.9%
Cu 1.2-2.0%
Mn 0.30%
Fe 0.50%
Si 0.40%
Ti 0.20%
Cr 0.18-0.28%
Applications of Aluminum Tubes and Pipes
Highly stressed structural parts
Aircraft fittings
Gears and shafts
Fuse parts
Meter shafts and gears
Missile components
Regulating valve parts
Worm gears
Other aerospace and aircraft parts
Process of Aluminum Tubes and Pipes
Processing: hot extrusion, hole punching seamless, cold drawn
Surface treatment: anodizing, polishing, Powder coated, Electrophoresis, sand-blast, coating film etc.
All Aluminum 7075 supplied by Signi Aluminum meets or exceeds various specifications, including specifications from AMS, ASTM, QQ, MIL and SAE. Various sizes of aluminum 7075 are available in shapes including sheets. To find out if Aluminum 7075 is right for your next project, please contact us immediately.
Email: gugeSigni@ksxinan.com