1. Home
  2. BLOG
  3. 6061-T6 aluminum alloy aluminum sheet bending

6061-T6 aluminum alloy aluminum sheet bending

Last Updated: 2021-03-03

6061-T6 aluminum alloy aluminum sheet bending.Aluminum is easier to bend when hot, but it is hot short…. it loses strength when hot. It’ll crack on the outside of the bend every time. You have to bend it cold and do so gently and evenly. Press brake is your best bet for thick sections. Leaf brake for thinner stuff. Henan Signi Aluminum also has professional industrial shears for precise cutting of sheet metal of any material, with four machines that have a maximum length of 4 m. The aluminum sheets must have a maximum thickness of 20 mm.Wide rage of aluminum metal sheet processingHenan Signi Aluminum can perform a wide range of aluminum sheet metal processing and profiles including:• Aluminum• Iron• Carbon• Stainless steel• Various alloysConsidering the poor formability of aluminum alloys at room temperature, this study proposes a stamping technique assisted by arc pretreatment that locally modifies the material properties. V-shape bending tests are conducted on the arc-treated specimens. The formability (bendability in particular) of 6061-T6 aluminum alloy is significantly improved by arc pretreatment and the springback is reduced as well. The reasons for formability improvement and springback reduction are analyzed through the microstructure, mechanical property, and fracture morphology of the heat-affected zone. The hardness at different locations within the heat-affected zone before and after bending is also tested. Finally, the advantages of arc pretreatment over other traditional forming processes at elevated temperatures are explained.We supply aluminum sheet sheet in different alloy and temper as following:

aluminum sheet sheet

Alloy

Thickness(mm)

Width(mm)

Length(mm)

Temper

DCorCC

1050 1060 1070 1100

0.2-3.0

20-1850

1000-10000

O,H12,H22,H14,H24,H16,H26, H18,H32

DC,CC

1235

3.0-150

500-2200

H112,H111

DC

3003 3004 3105

0.2-3.0

300-1850

1000-10000

O,H12,H22,H14,H24,H16,H26, H18,H32

DC,CC

3.0-150

900-1900

H112,H111

DC

5052508357545005

0.2-3.0

300-1850

1000-10000

O,H12,H22,H14,H24,H16,H26, H18,H32,H36,H116,H112,H321

DC

3.0-400

900-2600

H112,H111

DC

60616063

1.0-400

300-1500

1000-10000

T6,T651

DC,

Packing

Exportstandardwoodenpalletspacking

Application

MainlyinConstruction,decoration,PCBmaterials,covermaterial,LCDbackpanel,

refrigeration,airconditioner,automobile,etc

MOQ

5MT

Kindattention

Specificationscanbecustomizedasthecustomer’srequirements

Request a Quote