Have you ever encountered a manager who customized the project, the thickness of the aluminum sheet did not meet the standard, and the thickness was routine?
For conventional aluminum squares, the thickness of the aluminum gusset varies from 0.6 to 1.2 mm, while the thickness of the conventional aluminum veneer is 1.5, 2.0, 2.5, and 3.0 mm.
According to the national industry standard, the standard floor used for 0.8 mm is 0.65 mm, and the finished prodsuct after powder coating is about 0.75 mm, while the standard thickness of aluminum veneer 2.0 thick is 1.85 mm, plus powder coating. The finished prodsuct is about 1.95 mm, that is, the thickness minus 0.15 is the standard floor thickness, and the thickness lower than the above is a non-standard prodsuct.
Therefore, it is necessary to implement the relevant requirements on the thickness of the aluminum sheet before placing an order.