## The thickness of 12 gauge aluminum sheet

### 12 gauge thickness in inches

12 gauge aluminum sheet is 0.0808 inches thick.

### 12ga aluminum thickness in mm

12ga approximate thickness in millimeters is 2.052 mm.

## The weight of 12 gauge aluminum sheet

The weight per unit area of the sheet can also be seen in pounds per square foot and kilograms per square meter.

The weight of 12 gauge aluminum(**ounces**): 18.24 oz/ft²

The weight of 12 gauge aluminum(**pounds** ): 1.14 lb/ft²

The weight of 12 gauge aluminum(**KG**): 0.5171 kg/ft²

The weight of 12 gauge aluminum(**KG/m²**): 5.567 kg/m²

## 12 gauge aluminum chart specification

Gauge | 12 | |

Thickness | Approximate thickness in decimal parts of an inch(in) | 0.0808 in |

Approximate thickness in millimeters(mm) | 2.052 mm | |

Weight Per Area | Weight per square foot in ounces avoirdupois(oz/ft²) | 18.24 oz/ft² |

Weight per square foot in pounds avoirdupois(lb/ft²) | 1.14 lb/ft² | |

Weight per square foot in kilograms(kg/ft²) | 0.5171 kg/ft² | |

Weight per square meter in kilograms(kg/m²) | 5.567 kg/m² |

## What is gauge?

Gauge sizes are numbers that indicate the thickness of a piece of sheet metal.

### Which is thicker gauge 12 or 24?

The rating for aluminum gauge may seem backward: the smaller the number, the thicker the sheet metal , The larger the number, the thinner the sheet metal.

Therefore, the thickness of the **24 gauge aluminum sheet is thinner than that of the 12 gauge aluminum sheet**.

**Parameters of other specifications of aluminum plate：**

8 gauge aluminum thickness

6 gauge aluminum thickness

10 gauge aluminum thickness

12 gauge aluminum thickness

14 gauge aluminum thickness

**16 gauge aluminum thickness**

20 gauge aluminum thickness

22 gauge aluminum thickness

24 gauge aluminum thickness

Note: The larger the value of Gauge, the thinner the sheet.

For more detailed and complete metal aluminum gauge chart please check url:

**What is the sheet metal gauge? How to calculate aluminum gauge?**

What is the weight of the aluminum sheet plate?

Standard sheet metal gauges in wikipedia