- 1 What is alloy 6082 aluminum sheet / plate?
- 2 Specification of 6082 aluminum sheet
- 3 6082 aluminum sheet/plate chemical composition (For Reference)
- 4 Physical properties of 6082 aluminum sheet
- 5 6082 aluminum sheet advantage
- 6 Usages of 6082 Aluminum Material Sheet
- 7 Standard of 6082 aluminum sheet/plate/coil
- 8 Packing Detail of 6082 Aluminum Sheet:
- 9 Why Choose Signi aluminum as Your Source for 6082 Aluminium Sheets?
What is alloy 6082 aluminum sheet / plate?
Alloy 6082 aluminum plate sheet is a medium strength alloy with excellent corrosion resistance.It has the highest strength of the 6000 series alloys. Alloy 6082 contain magnesium and silicon as the major alloying elements.
6082 aluminum sheet
6082 aluminium alloy designations
6000 series aluminum alloy:
- 6061 aluminum sheet/plate
- 6083 aluminum sheet/plate
- 6005 Aluminum sheet/plate
- 6060 Aluminum sheet/plate
- 6101 Aluminum sheet/plate
- 6005A Aluminum sheet/plate
3mm 6082 aluminum sheet
Specification of 6082 aluminum sheet
- Alloy: 6082
- Temper: O, T4, T451, T42, T6,T651,T62, T61,T6151
- Stretching capacity: 300000m² supposed width is 2000mm, then the maximum thickness is 150mm.
- Thickness: 0.3mm–600mm
- With: 20mm–3000mm
- Length: 1000mm–12000mm
- Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.
6082 aluminum sheet/plate chemical composition (For Reference)
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Others | Aluminium min. |
|
Each | Total | |||||||||||||
6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | – | 0.2 | 0.1 | – | – | 0.05 | 0.15 | Remainder |
Physical properties of 6082 aluminum sheet
TEMPER TYPES
TEMPERS |
O |
T4/T451 |
T42 |
T6/T651/T62 |
T61/T6151 |
The most common tempers for 6082 aluminium are :
- T6 – Solution heat treated and artificially aged .
- O – Soft .
- T4 – Solution heat treated and naturaly aged to a substantially stable condition .
- T651 – Solution heat treated, stress relieved by stretching then artificially aged .
Strength
Machinability
Forming
Corrosion resistance
Welding
6082 Aluminium sheet mechanical properties
- Mechanical Properties of 6082 Aluminum Sheet:
- Tensile strength σb (MPa): ≥ 205
- Conditional yield strength σ0.2 (MPa): ≥110
- Elongation δ10 (%): ≥14
- Sample size: all thickness
- Homogenization temperature: 555-565℃ holding time: 3 hours, cooling rate ≥ 200 ℃/h
TEMPERS | STRENGTH (METRIC/IMPERIAL) | BRINELL HARDNESS | ELONGATION | THICKNESS | |
Ultimate Tensile | Yield Strength | ||||
O | 40 | 14% | 1.5 – 3mm | ||
T4/T451 | 58 | 12% | 1.5 – 3mm | ||
T42 | 57 | 13% | 1.5 – 3mm | ||
T6/T651/T62 | 94 | 8% | 1.5 – 3mm | ||
T61/T6151 | 82 | 10% | 1.5 – 3mm |
- F – As fabricated.
- T5 – Cooled from an elevated temperature shaping process and artificially aged. Applies to products that are not cold worked after cooling.
- T5511 – Cooled from an elevated temperature shaping process, stress relieved by stretching and artificially aged.
- T6 – Solution heat treated and artificially aged.
- O – Soft , Annealed. This is the lowest strength, highest ductility temper.
- T4 – Solution heat treated and naturally aged to a substantially stable condition. Applies to products that are not cold worked after solution heat-treatment.
- T6511 – Solution heat treated, stress relieved by stretching, and artificially aged.
6082 aluminum sheet advantage
- 6082 aluminum sheet has good formability, weldability, machinability and corrosion resistance;
- 6082 Aluminum Sheet with moderate strength, after the annealing can still maintain a good operability;
- good anode reaction performance, the most commonly used anode reaction methods include the removal of impurities and dyeing, coating and so on;
- 6082 aluminum sheet -0 and T4 state for bending and forming the occasion;
Usages of 6082 Aluminum Material Sheet
auto shell made of aluminum sheet
Applications
6082 is typically used in:
- Highly stressed applications
- Trusses
- Bridges
- Cranes
- Transport applications
- Ore skips
- Beer barrels
- Milk churns
More 6082 alloy applications:
Aviation fixtures, trucks, towers, ships, pipelines and other construction applications where strength, weldability and corrosion resistance are required. Such as: aircraft parts, camera lenses, couplers, marine accessories and hardware, electronic accessories and connectors, decorative or various hardware, hinge heads, magnetic heads, brake pistons, hydraulic pistons, electrical accessories, valves and valve parts.
Standard of 6082 aluminum sheet/plate/coil
- EN 485-2
- EN 573-3
- EN 754-2
- EN 755-2
- ISO 6361
Packing Detail of 6082 Aluminum Sheet:
6082 alloy metal related reference materials
cutting edge without burrs of 6082 aluminum sheet
Why Choose Signi aluminum as Your Source for 6082 Aluminium Sheets?
- More Than 12 Decades of Experience in Manufacture, Stock & Supply of 6082 Aluminium Sheets
- Best Prices For Alloy 6082 Aluminium Sheets – Supplied Worldwide with Shortest Delivery Time
- Exporting ASTM, EN Standard Compliant Aluminium 6082 Sheets is Our Specialty
- We Can Handle the Logistics for You – We can offer FOB, CIF Delivery to Any Port
- Documents We Provide Include – Certificate of Origin, Invoice & PL Attested by Chamber of Commerce, Test Certificates as per EN 10204 3.1, Other Testing Reports, as may be Required by Our Customers.
Features of 6082 aluminum plate sheet
- Good formability, solderability and brazeability.
- It has medium strength and good machinability.
- Good usability and excellent interface characteristics.
- Easy to process, good anode reaction performance and easy coating.
- Good corrosion resistance and oxidation resistance.